Eugene Residential Electrical
Hub City Electric LLC wires Eugene homes, from the mid-century houses in Friendly and Whiteaker with tired panels to view homes up in the South Hills. Licensed Oregon electrician (CCB#247871), running down from Albany on the north end of the valley. Small crew, one price up front, work you never have to think about again.
Home Wiring Sized for How Eugene Lives Now
Eugene is the biggest city we serve and a good share of the residential work we do here starts with the same fact: a lot of these houses were wired for a much smaller electrical life. Whole streets in Friendly, Whiteaker, and the College Hill area went up as post-war and mid-century homes with a panel meant to run a range, a furnace, and a few lights. That same house now carries a heat pump, an EV charger in the driveway, a home office, and a kitchen packed with counter appliances. When the wiring falls behind how a family actually lives, you feel it fast: breakers that trip when the microwave and a space heater run together, outlets that quit, lights that dim when the dryer kicks on.
We handle the full range of residential electrical work across Eugene, and we start every job the same way. We read what the house already has, then we tell you what it actually needs, whether that is a new panel, a service upgrade, a couple of dedicated circuits to take the strain off, or a corrected connection somebody left half-finished years ago. Nobody here gets sold a bigger job than the home requires. You talk to Brandon, he looks at the work, and you get a clear price in writing before we start.
Whole-Home and Partial Rewires
Older Eugene homes with cloth wiring, ungrounded two-prong outlets, or aluminum branch circuits get rewired safely, circuit by circuit or whole-house, with wall and ceiling damage kept to a minimum.
New Circuits and Dedicated Lines
Adding a heat pump, a hot tub, a shop, a range, or an EV charger usually means a new dedicated circuit. We size it right and pull it clean from the panel so nothing shares a load it should not.
Panel Repairs and Upgrades
Warm breakers, a full panel with no room to grow, or a recalled Federal Pacific or Zinsco box all get sorted. Bigger panel work links to our Eugene panel upgrade page.
Lighting and Fixtures
Recessed lighting, under-cabinet runs, exterior and security lighting, ceiling fans, and swapping dated fixtures for LED. Clean installs that match how the room is actually used.
Outlets, Switches, and GFCI
Adding outlets where a room comes up short, replacing worn devices, and bringing kitchens, baths, garages, and exterior receptacles up to code with proper GFCI and grounding.
Troubleshooting and Repairs
Dead outlets, a circuit that keeps tripping, a burning smell near a switch, or half the house losing power in the wet season. We find the real cause instead of guessing, and we fix it right.
Eugene Homes, Permitted and Inspected Right
Residential electrical work in Eugene falls under Oregon’s statewide electrical code and the permitting run through Lane County and the City of Eugene. That is not red tape we route around, it is how the work gets verified. On any job that requires it, a panel replacement, a service change, a new circuit for an EV charger or a hot tub, a rewire, we pull the electrical permit, do the work to code, and schedule the inspection. When we leave, the job is on the books and signed off, which matters if you ever sell the house or file an insurance claim.
Most of Eugene is served by EWEB, the Eugene Water and Electric Board, so anything that touches the meter or the service entrance, like a service upgrade, means coordinating a brief power shutoff with the utility. We handle that scheduling too, so you are not stuck on hold sorting out a disconnect while an open panel sits in your garage. We run down to Eugene from Albany at the north end of the valley, and we take that drive because thorough electrical work is worth it. A lot of Eugene homeowners and landlords keep our number because they get a service window they can plan a day around and a licensed electrician who does the job right the first time.
Eugene is inside our service radius. Call (541) 220-0295 for a free quote with the price up front.
Veterans get 5% off. Mention it when you reach out.
One Crew, Start to Finish in Eugene
Brandon picks up the phone. You tell him what is going on. He asks a few questions, sets a time, and then he is the one who shows up at your Eugene home to look at the work and do it. No subcontractors, no hand-offs to a crew you never met. Same electrician from the first call to the final walk-through.
Free Quote at Your Home
We come to your Eugene property, look at the job, and give you a written price before any work starts. No charge for the visit.
Permit-Ready Work
We pull the permit on every job that requires one and schedule the Lane County inspection. Oregon CCB#247871.
Clean Finish
Panel directory labeled, runs tucked neat, and the house left tidy. The next electrician, or the next remodel, will thank us.
Built for a University-Town Housing Market
Eugene has a housing market that behaves differently than the smaller valley towns, and that shapes the residential work we do here. Around the University of Oregon and out through the older neighborhoods, whole blocks of homes have been turned into rentals and student housing, and many are carrying far more electrical load than they were ever built for. Window units, mini-fridges, gaming rigs, and space heaters stack up fast on a panel sized for a single family decades ago. Landlords and owners call us to bring that service current safely between tenants, and we turn the work around quickly so a unit does not sit empty while a term starts.
On the owner-occupied side, a lot of Eugene homeowners are investing in the homes they plan to keep: finishing a basement, opening up a kitchen, adding a heat pump and an EV charger, or wiring an ADU in the back for family or rental income. We coordinate with your contractor on remodels so the electrical is roughed in on schedule and finished clean, and we hold the same standard whether it is a two-outlet add or a full rewire. Because it is the same small crew on every job, the wiring stays consistent from the panel to the last outlet, the directory is labeled so you and the next electrician can read it, and the price is in writing before we begin. Veterans get 5% off. Call (541) 220-0295 and we will set up a time to look at your Eugene home and get you a free quote.
Got an electrical job at your Eugene home?
Call or message us for a free quote on any residential electrical work. We serve Eugene and all of Lane County.
Eugene Residential Electrical Questions
Do you work on the mid-century homes in Friendly, Whiteaker, and around campus?
Yes, that is a big part of what we do in Eugene. Many of the mid-century and post-war homes in Friendly, Whiteaker, College Hill, and near the University of Oregon have cloth wiring, ungrounded outlets, or undersized panels. We rewire, add grounding, replace panels, and bring the electrical up to a safe modern standard, whether it is an owner-occupied home or a rental between tenants.
Do I need a permit for residential electrical work in Eugene?
Most real electrical work does. Panel replacements, service upgrades, new circuits, and rewires all require an electrical permit through Lane County and the City of Eugene. We pull the permit, do the work to Oregon code, and schedule the inspection as part of the job, so it is on the books and signed off when we leave.
Do you charge extra to come to Eugene from Albany?
Eugene is a regular part of our service area at the south end of the valley, and we travel there for both residential and commercial electrical work. Call (541) 220-0295 and we will set a service window you can plan your day around and give you a clear price up front, with no surprise trip charges buried in it.
Can you add circuits for a heat pump, hot tub, or EV charger?
Yes. Those additions almost always need a new dedicated circuit sized for the load, and sometimes a panel with more room. We check your panel’s available capacity, size the circuit correctly, pull it clean, and pull the permit. If the panel is full or undersized we will tell you before we start, not after.
Do you coordinate with EWEB for service changes?
Yes. Anything that touches the meter or service entrance on an EWEB-served Eugene home means a brief coordinated shutoff with the utility. We schedule that so you are not sorting out a disconnect on your own while an open panel sits in the garage. Homes on a rural cooperative outside the EWEB area get the same coordination with whoever supplies the power.
Do you offer a veterans discount on residential work in Eugene?
Yes. Veterans get 5% off any residential electrical job in Eugene. Mention it when you call or fill out the contact form. It applies throughout our service area.
