Panel Replacement in Albany
Hub City Electric replaces outdated electrical panels in Albany, OR. Safe, permitted, done right. Licensed CCB#247871. Call (541) 220-0295 for a free quote.
Panel Replacement Without the Hassle
Your electrical panel is the heart of the whole system, and when it is old, undersized, or one of the brands with a known safety record, it becomes the biggest hidden risk in the house. Federal Pacific Stab-Lok panels and Zinsco panels are notorious for breakers that do not trip when they should, which is exactly the situation you do not want behind a fire. Old fuse boxes and panels that have simply aged out cause constant tripping and put your appliances at risk. Replacing the panel fixes all of it at the source.
We replace residential panels throughout the Albany area, and we have done enough of them to make it a smooth day. We handle the permit, we coordinate the power shutoff with the utility, and in most cases we get your power back on the same day. You are not living without lights for a week. We also give you a straight price before we start, so the number on the invoice is the number we quoted.
A panel replacement is also the right moment to think about capacity. If you are still on 100-amp service and you have added a hot tub, central air, or you are eyeing an EV, that 100 amps is stretched thin. Moving up to 200-amp while we already have the panel out is far cheaper than doing it as a separate job later. We will look at your loads and tell you honestly whether you need the extra capacity or whether your current service is fine.
Main Panel Replacement
Replace your old panel with a new 200-amp or 400-amp service panel.
Federal Pacific & Zinsco Replacement
Safe removal of recalled panel brands that pose fire and shock hazards.
Fuse Box Upgrade
Replace outdated fuse boxes with modern circuit breaker panels.
Service Entrance Upgrade
Upgrade your service from 100A to 200A when you need more capacity.
Permit & Inspection
We pull the electrical permit and coordinate the utility shutoff and inspection.
The Residential Panel Replacement Process
Assess the panel and your loads
We look at what you have, why it is failing, and how much capacity your home actually needs now and going forward.
Pull the permit and schedule the shutoff
We file the electrical permit and arrange the utility disconnect so the day of the swap goes clean.
Swap the panel and re-land circuits
We remove the old panel, set the new one, and reconnect every circuit with tight, labeled terminations.
Inspection and power back on
We meet the inspector, restore your power, and confirm every circuit is working before we leave. Usually same day.
What to Know Before You Start
The Federal Pacific and Zinsco situation is worth understanding. These were installed widely for decades, and the problem is that their breakers can fail to trip under a fault, which defeats the entire point of a breaker. If you have one, replacement is not really optional, and we can document the upgrade for your insurance company, which often wants it gone anyway. We pull these out and put in modern panels with breakers you can trust.
Every panel replacement in Oregon requires a permit and an inspection, with no exceptions. A panel swapped without a permit is a problem when you sell and a liability if anything ever goes wrong. We always permit the work. The cost mostly comes down to the service size you choose, whether the service entrance and meter base also need work, and the condition of the existing wiring we are reconnecting. We walk you through all of it before the first wire comes loose.
Licensed Oregon electrician (CCB#247871) covering Albany and a 70-mile radius across the Willamette Valley. Call (541) 220-0295 for a free quote with a clear price up front.
Veterans get 5% off. Mention it when you reach out.
Why Albany Calls Us for This Work
Power back on the same day
We plan the swap so you are not without electricity for days. In most cases the lights are back on before we pack up.
We handle the utility shutoff
Coordinating the disconnect with the utility is on us. You do not make a single phone call to make this happen.
We pull out the recalled brands
Federal Pacific Stab-Lok and Zinsco panels get replaced with breakers that actually trip, and we document it for your insurer.
Right-size while we are in there
Going from 100 to 200-amp is far cheaper during the replacement than as its own job later. We size it for what you actually run.
Licensed Electrician for Albany, OR
Hub City Electric LLC is licensed in Oregon (CCB#247871) and carries full insurance. Brandon founded the company in 2023 and brings 11 years of electrical experience. Every job is handled by our own crew. No subcontractors, no shortcuts.
Common Questions
How long does a panel replacement take?
Most residential panel replacements take 4-8 hours. You’ll be without power for part of that time, but we work to get you back on as quickly as possible, usually the same day.
Do I need to do anything before the appointment?
We’ll handle the utility coordination. You should plan to be home for the full day and make sure we have clear access to the panel location.
What size panel do I need?
Most homes need a 200-amp service. Larger homes with electric HVAC, EV chargers, or future additions may benefit from 400-amp. We’ll assess your current and future needs.
Is a permit required for panel replacement?
Yes, always. A panel replacement without a permit is unsafe and can create problems when you sell your home. We always pull the proper permit and get the work inspected.
Do you replace Federal Pacific panels?
Yes. Federal Pacific Stab-Lok panels are known fire hazards. We replace them with modern, safe panels and can document the upgrade for your insurance company.
Do veterans get a discount?
Yes, veterans get 5% off. Just mention it when you contact us.
Time to swap that old panel?
Call or message us for a free quote. We pick up fast and give you a straight answer.